Waves Qrec Manual Apr 2026

Lower the node's threshold until the gain reduction meter starts moving only on the loudest notes . If the reduction meter is constantly active, your threshold is too low. Raise it until only the "booms" trigger it.

Double-click on the peak at 78Hz. A node appears. waves qrec manual

Product Version: 14.0+ Document Type: In-Depth User Guide 1. Introduction The Waves QREC (Quick Resonance EQ Control) is not your traditional equalizer. While it shares visual similarities with the acclaimed F6 Floating-Band Dynamic EQ, QREC is specifically architected for one surgical task: the attenuation of erratic, ringing, or "whistling" resonances. Lower the node's threshold until the gain reduction

QREC removes gain . This preserves the natural timbre of the source while preventing harshness from poking through. Double-click on the peak at 78Hz

Unlike static EQ cuts, which remove frequency content regardless of level, QREC listens dynamically. It waits for a specific frequency to become problematic (too loud relative to its neighbors) and then applies an immediate, narrow-band gain reduction. Think of it as an automatic "problem frequency tamer" for post-production, live sound, and mastering. Traditional EQ removes frequencies constantly. If you cut 5 dB at 3.15 kHz, you lose 5 dB even when the vocal sounds good.