If you have ever felt that a video player was "laggy" or that a 3D viewer was "stuttering," you were judging the quality of its ViewerFrame mode.
In tools like DaVinci Resolve or Unreal Engine , look for settings labeled "Scrubbing Video Quality" or "Viewport Motion Blur." Set them to High if you have an NVMe drive; set them to Low if you are on a spinning hard drive.
When you scrub through a 4K video timeline, rotate a 3D CAD model, or fly through a point cloud, you are engaging with a concept rarely discussed outside of graphics engineering circles: .
In order to be eligible to make a warranty claim, you must complete the registration for warranty here: www.deckwise.com/warranty/register.html viewerframe mode motion
The method of 45 degree screws hold the decking tight to the joist, while allowing one side of the deck board to remain free to contract.
Running screws straight down with composite/PVC decking allows these materials to naturally move on their length.
| Board Thickness | Board Width |
|---|---|
| A* = Measurement Of Your Decking | B** = Measurement Of Your Decking |
| Thickness of Cut | Cutting Height | Cutting Depth |
|---|---|---|
| C = 5/32" (4mm) | D*** = (A-5/32")/2 | E = 1/2" (13mm) |
| During Installation |
|---|
| F**** = 3/32" (2,4mm) |
* If using 1-1/2" (38,1mm) or thicker material, you may need to upgrade to a longer screw option than what is typically packaged with the fastening kit. If you have ever felt that a video
** For decking 8" (20,32cm) or wider, the (A) dimension should be at least 1-1/2" (38,1mm). Using a wide plank such as this for surface decking will most likely cause cupping issues regardless of how the material is fastened if thicker material is not used.
*** This formula will create a symmetrical profile that allows you to flip and/or rotate the decking to be able to put the best side up.
**** Fastener automatically achieves correct gap spacing when boards are pushed tight during installation. rotate a 3D CAD model
Deck Fastener Ipe Clip® Kits may be ordered in differences of 100 count (50 sq. ft.) components and 175 Complete Kit sizes (100 sq. ft.). All deck building screws may also be special ordered with diverse screw lengths, color and style.
Kits come with 25 wood plugs, and 25 stainless steel #8x2" deck screws.
Sold Seperately
EXTREME® Ipe Clip® Series - U.S. Patent Numbers 8,464,488 and 8,806,829.
Original, “round”, STANDARD Ipe Clip® - U.S. Patent No. D470,039.
EXTREMEKD® and EXTREME4® Licensed under U.S. Patent Nos. 7,874,113 and 8,161,702 Patent.
