Unable To Load Fortiguard Ddns Servers List On Fortigate Firewalls Site
show full-configuration system fortiguard Look for set fortiguard-anycast or set fortiguard-address . If set, try disabling them:
For immediate relief, manually configuring the DDNS entry via CLI bypasses the list loading step entirely. However, for long-term health, ensure the FortiGate can reach services.fortiguard.net over HTTPS with correct time and valid certificates.
get system status | grep "Date" Compare with actual UTC. If incorrect, configure NTP: get system status | grep "Date" Compare with actual UTC
Check for overrides:
execute ntp-sync After sync, retry the DDNS list load. Use the built-in CLI tool to fetch the DDNS list manually: set proxy-port <
Introduction FortiGate firewalls offer a built-in Dynamic DNS (DDNS) client that works seamlessly with Fortinet’s own FortiGuard DDNS service (e.g., *.fortiddns.com ). However, administrators occasionally encounter a frustrating issue: when attempting to configure DDNS, the firewall displays the error: "Unable to load FortiGuard DDNS servers list." This message typically appears in the GUI under Network > DNS > Dynamic DNS when clicking the dropdown for server selection, or during CLI operations. Without access to this list, you cannot select the FortiGuard DDNS service, making dynamic updates impossible.
diagnose test application fortiguard 1 Or restart the FortiGuard service: set proxy-auth disable end Without this
config system fortiguard set proxy-type proxy set proxy-server <proxy-ip> set proxy-port <port> set proxy-auth disable end Without this, HTTPS requests bypass the proxy and fail. Sometimes the local cache corrupts. Clear it with:
config system fortiguard unset fortiguard-anycast set fortiguard-address "services.fortiguard.net" end Then retry. If the FortiGate is behind an explicit proxy, configure it to use the proxy for FortiGuard updates:
config system ntp set ntpsync enable set server "pool.ntp.org" end Then force a sync: