Tower Crane Foundation Design Calculation Example Access

This exceeds (q_allow = 150 , \textkPa) → or must be deepened or widened. 4.5 Revised foundation size Try (L = B = 7.0 , \textm, t = 1.5 , \textm):

Effective width (L') (ULS) with (e = M_d / N_total,ULS = 6300 / 2985.5 = 2.11 , \textm) [ L' = 3\times(3.5 - 2.11) = 4.17 , \textm ] [ q_max,ULS = \frac2 \times 2985.57 \times 4.17 = \frac597129.19 \approx 204.5 , \textkPa ] Tower Crane Foundation Design Calculation Example

Moment about column edge = pressure resultant × lever arm. Use trapezoidal distribution? For simplicity, take average pressure = (204.5 + 0)/2? No, partial uplift. Actually, use effective width method: This exceeds (q_allow = 150 , \textkPa) →

7.0 m × 7.0 m × 1.5 m thick. 5. Stability Checks 5.1 Overturning (ULS) [ M_overturning,ULS = M_d = 6300 , \textkNm ] Restoring moment (about edge): [ M_restoring = N_total,ULS \times \fracL2 = (1148 + 1837.5) \times 3.5 = 2985.5 \times 3.5 = 10449 , \textkNm ] Factor of safety: [ FOS = \frac104496300 = 1.66 > 1.5 \quad \text✓ OK ] 5.2 Sliding (ULS) Sliding force (H_d = 97.5 , \textkN) Friction resistance: (\mu = 0.45) (concrete on stiff clay) [ R_friction = N_total,ULS \times \mu = 2985.5 \times 0.45 = 1343.5 , \textkN ] [ FOS_sliding = 1343.5 / 97.5 = 13.8 \gg 1.5 \quad \text✓ OK ] 6. Structural Design of Pad (ULS) 6.1 Bending moment at column base interface Ultimate bearing pressure distribution (simplified for ULS) – Use factored loads and effective area. For simplicity, take average pressure = (204