V1.4 Klipper | Mks Gen

[fan] pin: PH3

cd ~/ cd klipper make menuconfig Set the following options exactly: mks gen v1.4 klipper

[extruder] step_pin: PF6 dir_pin: PF7 enable_pin: !PD7 microsteps: 16 rotation_distance: 33.500 nozzle_diameter: 0.400 filament_diameter: 1.750 heater_pin: PH5 sensor_type: EPCOS 100K B57560G104F sensor_pin: PK5 control: pid pid_Kp: 22.2 pid_Ki: 1.08 pid_Kd: 114 min_temp: 0 max_temp: 250 [fan] pin: PH3 cd ~/ cd klipper make

[printer] kinematics: cartesian max_velocity: 300 max_accel: 3000 max_z_velocity: 5 max_z_accel: 100 mks gen v1.4 klipper

| Setting | Value | |------------------------|-------------------------------| | Microcontroller | Atmel ATmega2560 | | Processor model | ATmega2560 | | Communication interface | USB (ID 2341:0042) | | Baud rate | 250000 (or 115200 ) | | GPIO pins to set at startup | (Leave blank) |