Mikroc ✯

while(1) adc_val = ADC_Read(0); // Read AN0 temperature = adc_val * 0.48876; // 5V/1024 = 4.8828mV, LM35 10mV/°C -> multiply by 0.48876 FloatToStr(temperature, txt); Lcd_Out(2,1, txt); Lcd_Out(2,10, "°C"); Delay_ms(500);

void main() TRISB = 0x00; // Set PORTB as output PORTB = 0x00; // Initial state OFF while(1) PORTB.B0 = 1; // Turn LED ON Delay_ms(1000); // Wait 1 sec PORTB.B0 = 0; // Turn LED OFF Delay_ms(1000); mikroc

void main() ADC_Init(); // Initialize ADC Lcd_Init(); // Initialize LCD Lcd_Cmd(_LCD_CLEAR); Lcd_Cmd(_LCD_CURSOR_OFF); Lcd_Out(1,1, "Temp: "); while(1) adc_val = ADC_Read(0); // Read AN0 temperature