Ericsson Router 6672 Configuration » [ ULTIMATE ]

interface mgmt 0 ip address 192.168.1.10/24 ip default-gateway 192.168.1.1 no shutdown exit username operator password <encrypted-password> privilege 15 4. Interface and VLAN Configuration 4.1 Physical Port Naming Ports follow the format: port <slot>/<port> (e.g., port 1/1 to 1/24 for 1GE, port 2/1 to 2/4 for 10GE). 4.2 Configure Trunk Port (to downstream eNB/NodeB) interface port 1/5 description "Downlink to Site-5-eNB" mtu 9216 no shutdown exit vlan 100 name "Backhaul-VLAN" exit

interface port 1/5 switchport switchport mode trunk switchport trunk allowed vlan 100 exit interface port 1/10 description "OOB-MGMT-Server" switchport mode access switchport access vlan 10 spanning-tree portfast no shutdown exit 4.4 Configure L3 VLAN Interface (SVI) interface vlan 100 description "Backhaul-Gateway" ip address 10.10.10.1/24 vrrp 1 ip address 10.10.10.254 priority 150 preempt exit no shutdown 5. IP Routing Configuration 5.1 Static Route ip route 0.0.0.0/0 10.10.1.254 5.2 OSPF Configuration (for IGP) router ospf 1 router-id 1.1.1.1 network 10.10.0.0/16 area 0.0.0.0 network 192.168.1.0/24 area 0.0.0.0 passive-interface vlan 100 exit 5.3 IS-IS for MPLS Transport (typical for Ericsson backhaul) router isis 1 is-type level-2-only net 49.0001.0100.0000.0001.00 metric-style wide interface port 2/1 ip router isis 1 isis circuit-type level-2 exit 6. MPLS and LDP Configuration 6.1 Enable MPLS on Core Interfaces mpls label protocol ldp mpls label range 20000 30000 interface port 2/1 mpls ip mpls mtu 1500 exit 6.2 LDP Configuration mpls ldp router-id 1.1.1.1 interface port 2/1 exit 7. Service Configuration (Pseudowire / VPLS) 7.1 MPLS Pseudowire (Ethernet over MPLS – EoMPLS) interface pseudowire 1 description "EoMPLS to Site-B" encapsulation mpls neighbor 2.2.2.2 vcid 100 pw-class ethernet transport-mode ethernet mtu 1500 exit exit interface port 1/5 service-instance 1 encapsulation dot1q 100 rewrite ingress tag pop 1 bridge-domain 100 split-horizon exit exit 8. Synchronization (SyncE & PTP) 8.1 Synchronous Ethernet (SyncE) interface port 2/1 sync-eth enable sync-eth quality-level prc exit 8.2 PTP (IEEE 1588v2) – Ordinary Clock ptp mode ordinary-clock domain 24 interface port 2/1 sync-master delay-mechanism e2e exit 9. Security & Management Access 9.1 Restrict SSH Access access-list 10 permit 192.168.10.0 0.0.0.255 access-list 10 deny any line vty 0 4 access-class 10 in transport input ssh login local exit 9.2 Disable Unused Services no ip http server no ip finger no service telnet 10. Save Configuration write memory or ericsson router 6672 configuration