Download Driver Jinka Pro 721 For Windows 10 〈ULTIMATE — 2024〉

The Jinka Pro 721 does not usually act like a standard printer. You must use compatible cutting software to send designs to it: CH341SER.EXE - Nanjing Qinheng Microelectronics Co., Ltd.

Once the "Installation Successful" message appears, plug the plotter into a USB 2.0 port and turn it on. Verify in Device Manager: Right-click the Start button > Device Manager Ports (COM & LPT) Download Driver Jinka Pro 721 For Windows 10

To download and install the driver for the Jinka Pro 721 (including NXL Pro models) on Windows 10, follow the steps below. This machine typically requires a specific USB-to-Serial chipset driver to be recognized by your computer. 1. Download Required Drivers Most Jinka plotters use the The Jinka Pro 721 does not usually act

. This driver supports Windows 10 (32/64-bit) and is the most reliable way to get the hardware recognized. Alternative Source: Verify in Device Manager: Right-click the Start button

Some users find success with specific Jinka driver packages hosted on Google Drive or provided via YouTube tutorial links 2. Installation Steps Disconnect the Plotter: Keep the USB cable unplugged from your PC before starting. Install CH341SER: Run the downloaded file and click Connect Hardware:

, you should see "USB-SERIAL CH340 (COMx)". Note the COM port number (e.g., COM3). 3. Software Compatibility