C3750e-universalk9-mz.150-2.se11.bin Site
show license show version | include License | License | Features | | :--- | :--- | | IP Base (default) | Static routing, basic VLANs, STP, SNMP, SSH | | IP Services | Full dynamic routing (OSPF, EIGRP, BGP), multicast, advanced QoS |
license right-to-use activate ipservices eval (requires purchase from Cisco): c3750e-universalk9-mz.150-2.se11.bin
show license right-to-use ⚠️ Without a valid IP Services license, dynamic routing protocols will not work. 6.1 Basic switch setup enable configure terminal hostname SW-3750E interface vlan 1 ip address 192.168.1.10 255.255.255.0 no shutdown ip default-gateway 192.168.1.1 line vty 0 15 password cisco login enable secret cisco end write memory 6.2 Upgrade a stack # On master switch copy tftp://10.1.1.100/c3750e-universalk9-mz.150-2.se11.bin flash: archive download-sw /overwrite /reload tftp://10.1.1.100/c3750e-universalk9-mz.150-2.se11.bin 6.3 Enable SSH ip domain-name example.com crypto key generate rsa modulus 2048 ip ssh version 2 line vty 0 15 transport input ssh 7. Troubleshooting Boot Issues | Problem | Likely cause | Fix | | :--- | :--- | :--- | | Boot loop | Bad image or corrupt flash | Boot from ROMmon (Press Mode button during boot), then flash_init , copy xmodem: | | "Not enough memory" | Insufficient DRAM | Upgrade DRAM to 512 MB or use a lighter image (if available) | | License missing | No IP Services license | license right-to-use activate ipservices eval (temp) | | Switch not booting new image | Boot statement missing | Interrupt boot (Ctrl+Break), set BOOT=flash:/image.bin | show license show version | include License |
license install flash:<license-file.lic> Licensing (Critical
copy scp://user@<server>/path/file.bin flash: configure terminal boot system flash:/c3750e-universalk9-mz.150-2.se11.bin end write memory 4.5 Reload to load new IOS reload 5. Licensing (Critical!) universalk9 contains all features but requires right-to-use (RTU) licenses.
