Big Brother- Another Story Rebuild -v0.06.00- -... -

Highly recommend before doing this thing to make a backup of your data.

Enable USB debugging.
Without this, you cannot perform the operation of flashing the new software on your device.
Open Odin program.
Click and run as administrator.
Need to put the devices in download mode.
To do this by holding at the same time the home button the power on button and also the volume down button right now we are in download mode click volume up.
Let’s connect your device with the computer.
Use the USB cable to connect the smart device and also the Laptop or PC.
ID: COM is highlighted
Look Odin screen will show a short message and this means that the device is recognized by Odin.
If your firmware has 4 files –
Need to assign every single piece of Firmware files to every single BL, AP, CP, CSC boxes.
1 file firmware – If you have AP file only add it to AP button clicking.
Auto reboot and F reset time are ticked.
Make sure that in the options tab.
Push the Start button for begin Firmware flash.
Now you can start flashing your Samsung device.
PASS!! green message.
It means Successful complete your process.