6.6.7 Packet Tracer - Configure Pat.pka Apr 2026

R1# show ip nat translations You should see something like:

R1(config)# access-list 1 permit 192.168.1.0 0.0.0.255 Here’s the money line — notice the overload keyword. That enables PAT. 6.6.7 packet tracer - configure pat.pka

Then check translations:

R1(config)# ip nat inside source list 1 interface serial 0/1/0 overload This means: Take any packet from ACL 1, translate its source IP to the S0/1/0 interface IP (209.165.200.226), and keep track by port number. From PC1, PC2, and Laptop, ping 209.165.200.225 . R1# show ip nat translations You should see

Have questions or corrections? Drop them in the comments. 6.6.7 packet tracer - configure pat.pka

R1(config)# interface g0/0 R1(config-if)# ip nat inside R1(config)# interface s0/1/0 R1(config-if)# ip nat outside Which traffic should be translated? All traffic from the LAN.