The Siemens Siwamat 8080 manual reflects the engineering philosophy of its era: durable, repairable, and unambiguous. Unlike modern touchscreen machines, its mechanical timer and discrete thermostat gave the user direct, tactile control over every wash parameter. For today’s restorers or owners of a surviving 8080, the manual remains an essential document—not only for safe operation but also for understanding basic electromechanical washing machine logic. Following its maintenance schedule (especially filter cleaning and transit bolt removal) ensures the machine can remain functional for decades beyond its intended lifespan.
The Siemens Siwamat 8080 is a classic, fully automatic front-loading washing machine from Siemens’ legacy “Siwamat” series, popular in European households primarily during the late 1980s and early 1990s. Known for its mechanical robustness and straightforward electro-mechanical controls (pre-digital displays), this model represents a bridge between simple twin-tub machines and modern fully electronic units. This paper consolidates the key sections of the original user manual, covering safety, installation, program selection, maintenance, and common fault resolution. siemens siwamat 8080 manual
| Program | Max Temp | Cycle Duration (Normal) | Typical Use | | :--- | :--- | :--- | :--- | | Cotton / White | 95°C | 135 min | Sheets, towels, heavily soiled whites | | Cotton / Colored | 60°C | 120 min | T-shirts, underwear | | Easy-Care | 60°C | 85 min | Polyester/cotton blends, shirts | | Delicates | 40°C | 50 min | Curtains, fine fabrics | | Wool | 30°C | 45 min | Machine-washable wool | | Drain/Spin | — | 10 min | Final spin only (800 RPM) | The Siemens Siwamat 8080 manual reflects the engineering
The machine has four adjustable screw feet. Use a spirit level to ensure the machine is perfectly horizontal. The lock nuts on each foot must be tightened against the housing after leveling. This paper consolidates the key sections of the
| Problem | Probable Cause (from manual) | Solution | | :--- | :--- | :--- | | Machine does not start | Door not fully closed, power cord unplugged, start button not pulled out. | Push door firmly until click; check mains; pull start button. | | Machine vibrates heavily | Transit bolts still installed. | Remove transport screws from rear panel. | | Water not draining | Kinked drain hose or blocked filter. | Straighten hose; clean bottom filter. | | Detergent residue on clothes | Low-sudsing powder not used; too much detergent. | Use less detergent; run an empty hot cycle to clear residue. | | Drum does not turn | Belt slipped off (after many years). | Service required – manual warns not to open rear panel without training. |
Operational Guide and Technical Manual Analysis: The Siemens Siwamat 8080 Washing Machine
The manual emphasizes the removal of transit bolts. Four transport securing screws (located at the rear panel) must be unscrewed and replaced with the supplied cover caps. Failure to do so results in severe vibration and permanent damage to the drum suspension.