Iver Johnson Champion 12 Gauge Single Shot Shotgun Disassembly [ Free · 2024 ]
The Iver Johnson Champion is a quintessential American single-shot shotgun. Produced from 1909 to 1956 (and again briefly in the 1970s), it was the working-class hero of the field—affordable, reliable, and carried by countless hunters, trappers, and farmers. Unlike the elegant European break-actions, the Champion is a study in utilitarian simplicity. Its nickname, "The Farmer’s Friend," came from its ability to live behind a barn door for decades and still fire when a fox was in the henhouse.
Now go give that old farmer’s friend the respect it deserves. The Iver Johnson Champion is a quintessential American
If your Champion is pre-1940 with a "two-piece" firing pin, do not dry-fire it. You will break the firing pin. Use a snap cap or a spent shell. Its nickname, "The Farmer’s Friend," came from its
But even a champion needs a bath. If you’ve acquired a rusty, gummed-up heirloom or just want to give your old-timer a proper cleaning, disassembly is straightforward— provided you know the one hidden trick that frustrates most first-timers. SAFETY FIRST. Open the action. Visually inspect the chamber and barrel. Stick a finger in there. Make sure it is empty. Then, do it again. This shotgun has a hammer that rests directly on the firing pin; there is no transfer bar on most models. Assume it wants to fire. You will break the firing pin
You will feel a solid thunk . The entire barrel assembly will slide forward off the receiver about an inch. Lift it up and away. Congratulations: you now have a two-piece shotgun. Flip the receiver over. You’ll see a flat metal plate held by one or two small screws. Remove these. The entire trigger plate—containing the trigger, hammer, sear, and mainspring—will now lift out as a single cassette.
The Iver Johnson Champion is a quintessential American single-shot shotgun. Produced from 1909 to 1956 (and again briefly in the 1970s), it was the working-class hero of the field—affordable, reliable, and carried by countless hunters, trappers, and farmers. Unlike the elegant European break-actions, the Champion is a study in utilitarian simplicity. Its nickname, "The Farmer’s Friend," came from its ability to live behind a barn door for decades and still fire when a fox was in the henhouse.
Now go give that old farmer’s friend the respect it deserves.
If your Champion is pre-1940 with a "two-piece" firing pin, do not dry-fire it. You will break the firing pin. Use a snap cap or a spent shell.
But even a champion needs a bath. If you’ve acquired a rusty, gummed-up heirloom or just want to give your old-timer a proper cleaning, disassembly is straightforward— provided you know the one hidden trick that frustrates most first-timers. SAFETY FIRST. Open the action. Visually inspect the chamber and barrel. Stick a finger in there. Make sure it is empty. Then, do it again. This shotgun has a hammer that rests directly on the firing pin; there is no transfer bar on most models. Assume it wants to fire.
You will feel a solid thunk . The entire barrel assembly will slide forward off the receiver about an inch. Lift it up and away. Congratulations: you now have a two-piece shotgun. Flip the receiver over. You’ll see a flat metal plate held by one or two small screws. Remove these. The entire trigger plate—containing the trigger, hammer, sear, and mainspring—will now lift out as a single cassette.
