→ Not acceptable – must grind out crack and reweld. 8. Summary Table – Quick Reference (Steel, t = 5–30 mm) | Irregularity | B1 (tight) | B2 (medium) | B3 (loose) | |--------------------------------|--------------------------------|-------------------------------|--------------------------------| | Undercut depth | ≤ 0.3 mm | ≤ 0.5 mm | ≤ 1.0 mm | | Excess weld (butt) | ≤ 1 + 0.1×a | ≤ 2 + 0.15×a | ≤ 3 + 0.2×a | | Misalignment (butt) | ≤ 0.1×t (max 1 mm) | ≤ 0.15×t (max 2 mm) | ≤ 0.25×t (max 3 mm) | | Surface porosity (visible) | None or 1 pore / 100 mm | 2 pores / 50 mm | Scattered, <1 mm | | Crater cracks | Not allowed | Not allowed | ≤0.5 mm isolated only | | Incomplete fusion | Not allowed | ≤0.5 mm deep, local | ≤1 mm deep, local | 9. Final Recommendation When a drawing says "DIN 8570-B", immediately clarify the quality grade (B1, B2, or B3). In most modern welding quality management, convert to ISO 5817 or ISO 13920 for traceability. For training or inspection, use DIN 8570-B as a legacy baseline – not a replacement for EN/ISO standards. Would you like a printable checklist or a comparison table with AWS D1.1 as well?
Cute Twinks Network Presents. Selected content featuring cutest twinks from all over the world, fucking each other, sharing each other and having their first sexual experience for the very time. Banging each other like crazy, no knowing what to do because of their inexperience, but finally finding the right path to each others asses